VINYL DECAL APPLICATION INSTRUCTIONS
For the best results, you should apply decals when the temperature is above 50F and below 90F.
Step 1:Use rubbing alcohol to clean the surface area. Dry thoroughly.
Step 2:Prepare the decal for application by firmly rubbing a squeegee or credit card over the clear transfer tape. This ensures the decal is firmly stuck to the transfer tape and removes any air bubbles that may have formed.
Step 3:Carefully line up your design and place on the surface. Use masking or painters tape along the top edge to help keep the decal aligned.
Step 4: lift the sticker as if it’s on a hingeand gently remove the paper backing at a 45-degreeangle starting near the tape. If the decal clings to the backing, repeat step 2.
Step 5:Slowly lower the decal to the surface applying pressure as you go. Be careful; once it touches the surface there is no repositioning.
Step 6:Once in place, firmly rub a squeegee or credit card over the clear transfer tape to be sure the decal is attached to the surface.
Step 7:Gently remove the transfer tape at a 45-degree angle.
HANDWASH ONLY